POS-n-go Android POS Manual
The POS-n-go integration to the iCT 250 supports sale, refund, reprint and settlement transactions.
The payment terminal admin password is 111111.
Nuvei client services can be reached at 1-866-687-3722.
To manually process a sale or refund transaction.
- Press F2 followed by F3 rapidly.
- Select App.
- Press 1 for Sale or 3 for Refund.
To test payment host connectivity you may perform a key exchange:
- Press F2 followed by F3 rapidly.
- Select App.
- Press 9 for More.
- Press 4 for Admin.
- Press 2 for Key Exchange.
The payment terminal can be run in stand-alone mode where transaction amounts are manually keyed, or in integrated mode where POS-n-go sends the amount. Integrated mode displays the Nuvei logo.
To switch to stand-alone mode:
- Press F2 followed by F3 rapidly.
- Select Admin.
- Press 1 for Retail mode.
- Press 1 to turn Retail mode off.
- Press red cancel key.
To switch to integrated mode:
- Press the F key.
- Select Retail/QSR.
- Select Admin.
- Press 1 for Retail mode.
- Press 2 to turn Retail mode on.
- Press red cancel key.
To configure payment terminal tips:
- Press F2 followed by F3 rapidly.
- Select App.
- Press 9 for More.
- Press 4 for Admin.
- Press 1 for Setup.
- Press 1 for Options.
- Enter admin password 111111
- Press F1 or F4 to enable or disable tips.
To configure correct receipt printing for POS-n-go:
- Press F2 followed by F3 rapidly.
- Select Admin.
- Select 6 for Print Receipt.
- Select 2 for Terminal.
To configure a static IP address on the payment terminal:
- Switch to stand-alone mode using instructions above.
- Press the F key.
- Select 0 for Telium Manager.
- Select 3 for Initialization.
- Select 2 for Hardware.
- Select 2 for Ethernet Setup.
- Select 1 for Boot Protocol.
- Select 1 for Static Address.
- Select 2 for IP Address.
- Enter 192.168.55.4 and press the green Enter key.
- Select 3 for Subnet Mask.
- Enter 255.255.255.0 and press the green Enter key.
- Select 4 for Gateway.
- Enter 192.168.55.1 and press the green Enter key.
- Select 5 for DNS 1.
- Enter 8.8.8.8 and press the green Enter key.
- Select 6 for DNS 2.
- Enter 8.8.4.4 and press the green Enter key.
- Use the down arrow to select menu item 10 Save to save the changes.
- If the terminal does not reboot automatically disconnect then reconnect the power.
POS-n-go Basic Setup, Devices, Device Settings:
- Configure Payment Terminal Processor to Nuvei.
- Configure Payment Terminal IP to 192.168.55.4.