POS-n-go Android POS Manual

The POS-n-go integration to the Desk 5000 supports sale, refund, reprint and settlement transactions.

Elavon US Support

Elavon US client services can be reached at 1-800-725-1243.

Stand-Alone and Integrated Modes

The payment terminal can be run in stand-alone mode where transaction amounts are manually keyed, or in integrated mode where POS-n-go sends the amount. Integrated mode displays SEMI on the screen.

To switch to stand-alone mode:

  1. Press the SEMI button at the bottom left of the screen.
  2. Select Yes for Switch to StandAlone Mode.

To switch to integrated mode:

  1. Press the S/A button at the bottom left of the screen.
  2. Select Yes for Switch to Semi-Integrated.

Configuration

The Terminal IP address 192.168.55.4 and Gateway IP address 192.168.55.1 is for use with the POS-n-go router. When using another router select a Terminal IP address that is compatible with your network and outside the range of any dynamic addresses provided by your DHCP server. Similarily, select a Gateway IP address that is compatible with your router and network.

To configure payment terminal semi-integration:

  1. Press the # key for the Admin Menu.
  2. Enter the password 16G36120.
  3. Select Misc. Options.
  4. Select Semi-Integrated.
  5. Set Enable Semi-Integ to On.
  6. Set Communication Type to Ethernet and Terminal Port to 10001.
  7. Set Receipt Options to Terminal.
  8. Press the red cancel button to return to the admin menu.

To configure a static IP address on the payment terminal:

  1. Press the # key for the Admin Menu.
  2. Enter the password 16G36120.
  3. Select Setup Menu.
  4. Select Communications.
  5. Select Ethernet.
  6. Select Terminal Setup.
  7. Select Static IP.
  8. Enter 192.168.55.4 for TerminalIP.
  9. Enter 192.168.55.1 for IPGateway.
  10. Enter 255.255.255.0 for IPSubMask.
  11. Enter 8.8.8.8 for PriDNSIP.
  12. Enter 8.8.4.4 and SecDNSIP.
  13. Press the red cancel button to save and exit.
  14. The terminal will reboot.

POS-n-go Basic Setup, Devices, Device Settings:

  1. Configure Payment Terminal Processor to Ingenico.
  2. Configure Payment Terminal IP to 192.168.55.4.