POS-n-go Android POS Manual

The POS-n-go integration to the iCT 250 supports sale, refund, reprint and settlement transactions.

Admin Password

The payment terminal admin password is 111111.

Nuvei Support

Nuvei client services can be reached at 1-866-687-3722.

Stand-Alone Transaction

To manually process a sale or refund transaction.

  1. Press F2 followed by F3 rapidly.
  2. Select App.
  3. Press 1 for Sale or 3 for Refund.

Connectivity Test

To test payment host connectivity you may perform a key exchange:

  1. Press F2 followed by F3 rapidly.
  2. Select App.
  3. Press 9 for More.
  4. Press 4 for Admin.
  5. Press 2 for Key Exchange.

Stand-Alone and Integrated Modes

The payment terminal can be run in stand-alone mode where transaction amounts are manually keyed, or in integrated mode where POS-n-go sends the amount. Integrated mode displays the Nuvei logo.

To switch to stand-alone mode:

  1. Press F2 followed by F3 rapidly.
  2. Select Admin.
  3. Press 1 for Retail mode.
  4. Press 1 to turn Retail mode off.
  5. Press red cancel key.

To switch to integrated mode:

  1. Press the F key.
  2. Select Retail/QSR.
  3. Select Admin.
  4. Press 1 for Retail mode.
  5. Press 2 to turn Retail mode on.
  6. Press red cancel key.

Configuration

To configure payment terminal tips:

  1. Press F2 followed by F3 rapidly.
  2. Select App.
  3. Press 9 for More.
  4. Press 4 for Admin.
  5. Press 1 for Setup.
  6. Press 1 for Options.
  7. Enter admin password 111111
  8. Press F1 or F4 to enable or disable tips.

To configure correct receipt printing for POS-n-go:

  1. Press F2 followed by F3 rapidly.
  2. Select Admin.
  3. Select 6 for Print Receipt.
  4. Select 2 for Terminal.

To configure a static IP address on the payment terminal:

  1. Switch to stand-alone mode using instructions above.
  2. Press the F key.
  3. Select 0 for Telium Manager.
  4. Select 3 for Initialization.
  5. Select 2 for Hardware.
  6. Select 2 for Ethernet Setup.
  7. Select 1 for Boot Protocol.
  8. Select 1 for Static Address.
  9. Select 2 for IP Address.
  10. Enter 192.168.55.4 and press the green Enter key.
  11. Select 3 for Subnet Mask.
  12. Enter 255.255.255.0 and press the green Enter key.
  13. Select 4 for Gateway.
  14. Enter 192.168.55.1 and press the green Enter key.
  15. Select 5 for DNS 1.
  16. Enter 8.8.8.8 and press the green Enter key.
  17. Select 6 for DNS 2.
  18. Enter 8.8.4.4 and press the green Enter key.
  19. Use the down arrow to select menu item 10 Save to save the changes.
  20. If the terminal does not reboot automatically disconnect then reconnect the power.

POS-n-go Basic Setup, Devices, Device Settings:

  1. Configure Payment Terminal Processor to Nuvei.
  2. Configure Payment Terminal IP to 192.168.55.4.