POS-n-go Android POS Manual

The Star TSP100 Ethernet printer is supported.

The manual may be downloaded here: star_tsp100.pdf

To configure a static IP address on the printer:

  1. Turn off the printer.
  2. Hold the feed button down while turning on the printer. Release the feed button once it starts printing.
  3. On the first printed report confirm that the Emulation is set to Star. This is controlled with the DIP switches.
  4. On the second printed report note the IP Address.
  5. Configure a static IP address using these instructions.
  6. In the POS-n-go web portal in the Basic Setup, Devices, Device Settings section set the receipt or order Printer IP to the configured address. Set the Model to Star Raster. These settings will take effect after your next Download Settings.

Receipt Printer

  • IP Address: 192.168.55.5
  • Subnet Mask: 255.255.255.0
  • Default Gateway: 192.168.55.1

Order Printer 1

  • IP Address: 192.168.55.6
  • Subnet Mask: 255.255.255.0
  • Default Gateway: 192.168.55.1

Order Printer 2

  • IP Address: 192.168.55.7
  • Subnet Mask: 255.255.255.0
  • Default Gateway: 192.168.55.1

Order Printer 3

  • IP Address: 192.168.55.8
  • Subnet Mask: 255.255.255.0
  • Default Gateway: 192.168.55.1